GAMO Arrow Compensator/Moderator
Print Profile(1)
Description
Replacement for the standard red moderator.
Works with the GAMO Arrow in both .22 and .177 (4.5 and 5.5).
Louder than the original, but increased performance.
Assembly/Replacement guide:
The original insert can be extracted by pressing out the two dowels at the end of the barrel extension.
At this point the end cap can be taken off which exposes the red insert. Extract this with a pair of pliers or an L shaped Allen key (look up Gamo Arrow disassembly on YouTube if in doubt).
When extracted: Insert the printed compensator with the ports facing towards the holes on the left and right side of the barrel extension. It might need a firm press to seat it properly.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)