Comgrow/Sovol Filament Dryer Hydrometer Mount

This is a simple mount that I remixed off of what I felt was a good idea that could have been executed better.  I have a Comgrow filament dryer that I mounted on the side of my P1S to feed TPU in particular.  My issue was that I could not find a mount that I liked.  Some worked for a while and then failed, some required modifying the cover, some just sat on the top of a filament roll that was not currently feeding.  This one uses the filament feed holes that are from the manufacturer.  The model I based this off of blocked all of the feed holes, so I redesigned it to allow for a quick detach for a feed tube directly mounted to the printer.

Model that I remixed:

https://makerworld.com/en/models/1662297-hygrometer-bracket-for-comgrow-dryer?from=search#profileId-1758648

PCV adaptor:

https://makerworld.com/en/models/676932-pc4-m6-adapter-for-sovol-dryer-v1?from=search#profileId-605032

• nozzle .4mm  
• no supports required
• I printed in black PETG, but should work fine in PLA or ABS if you prefer
• under an hour print time
• 5 prototypes printed