H Series Dual AMS 2 Pro Shelf - Hot Ends drawer

This custom riser drawer is designed specifically for the Bambu H2D, H2S.

The H2C hot ends will not fit in the hot ends section of the drawer.

This Drawer Will only work for “H Series Dual AMS 2 Pro Shelf - H2Dual AMS” by Nothing Spectacular. His Riser is amazing and my favorite.

https://makerworld.com/en/models/1395451-h-series-dual-ams-2-pro-shelf-h2dual-ams?from=search#profileId-1446365.

It is short on length for his other riser he designed for  AMS+HT. If you need a Riser for your H2D, H2S, or H2C I highly recommend Nothing Spectaculars Riser. Give him a boost, he deserves it.

If you need a drawer for his other riser that has an AMS and HT, go here https://makerworld.com/en/models/2072152-h-series-ams-riser-plus-ht-hot-ends-and-drawer#profileId-2238217.

The tools I use and printed for this drawer are https://makerworld.com/en/models/478965-bambu-tools-bambu-lab-tool-set-labeled?from=search#profileId-390252 .  and https://makerworld.com/en/models/413611-ptfe-release-tool?from=search#profileId-315625

 good set of tools.

I believe i gave credit to everyone, If i didn't I apologize.

I printed my Riser out of ASA, and I printed the Drawer out of PetG. I did not adjust anything for shrinkage, Shrinkage setting was done at 100% .

If you need the face plate or handles, You can get them from nothing spectaculars riser, he has everything in there except this drawer.

When I printed his face plate, Handles, Riser, and this drawer, Everything aligned up perfectly.

I have included all files, an actual Solid model. If you need something different you can download the step file and change what you will.

If you remix or customize this design, please reference the original model in your upload.

Edit: I added a radius where the cutters are, so the cutters sit lower down in the drawer. and I re uploaded all files.

Have a Blessed day.