Search models, users, collections, and posts
P2S & X2D PTFE Chain Clips
IP Report
Print Profile(7)
Thicker Version (8 mm) - 3 Clips
Designer
12 min
1 plate
Standard (5 mm) - 3 Clips
Designer
11 min
1 plate
Anti-sliding 7mm pin version, 0.2mm layer
23 min
1 plate
PETG-CF 0.2mm layer, 2 walls, 0% infill
15 min
1 plate
Click to see more
Open in Bambu Studio
Boost
3380
13199
2474
269
20.4 k
17.4 k
Released
Description
I designed this simple model because I just couldn’t find any clips that fit the P2S chain properly — so I made my own!
The print profile includes three clips that you can place wherever you prefer.
You can place anywhere from one to three clips, depending on what works best for you.
Important: After installation, make sure the toolhead and chain can move freely across the entire bed before starting a print.
Position the clips where they best ensure both mobility and safety.
Hope you like it!
11/17/2025 Thicker Version Released!
Thanks to further testing and user feedback, I developed a thicker 8 mm version to help prevent occasional issues such as slipping and deformation.
Boost Me (for free)
Membership
Join
License
If you want to use this model commercially, please join my membership.
Join Now
This user content is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivatives
Comment & Rating (2474)