Nigersaurus hueforge

For Personal Use Only: Print as many as you like for yourself
Commercial License : Not allowed unless you hold a valid license on Makerworld or from my Patreon

Nigersaurus was a unique and fascinating dinosaur that lived around 110 million years ago during the middle of the Cretaceous period. It belonged to the group known as sauropods, the long-necked, plant-eating dinosaurs, but it was unlike most of its relatives in both size and appearance. Measuring about nine metres in length and weighing roughly four tonnes, it was relatively small for a sauropod, comparable in size to a modern elephant. Its fossils were first discovered in the Republic of Niger, in the Sahara Desert, which is how it received its name, meaning “Niger reptile.”

One of the most remarkable features of Nigersaurus was its skull and feeding apparatus. It had an unusually wide, straight-edged mouth filled with over 500 slender, replaceable teeth arranged in tightly packed rows, forming what looked almost like a vacuum cleaner nozzle. This specialized dental structure allowed it to graze close to the ground, cropping soft vegetation such as ferns and horsetails. Its teeth were replaced rapidly—roughly every two weeks—indicating it fed constantly on abrasive, low-lying plants.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 170x170mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

    #151715 PLA Deeplee Black  Transmission Distance: 0.1
    #626f89 PLA Deeplee Blue Grey  Transmission Distance: 2.5
    #8e8f8f PLA Deeplee Light Grey  Transmission Distance: 1
    #ffffff PLA Deeplee White  Transmission Distance: 6.1
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Blue Grey
    At layer #14 (1.2mm) swap to Light Grey
    At layer #19 (1.6mm) swap to White for the rest.
 

You can see my other Dinosaur pictures here in this collection: https://makerworld.com/en/collections/14092197-dinosaur-hueforge

You can Download a stand I have designed to fit  my Hueforge Artwork WITH a border at https://makerworld.com/en/models/1873510-hueforge-display-stand-for-prints-with-borders#profileId-2005518 or for Hueforges WITHOUT a border use this one: https://makerworld.com/en/models/1872617-hueforge-display-stand-for-prints-without-borders#profileId-2004540

If you print this model, please upload a photo of your result, Rate the print and leave a Review. 

Not only does it inspire others in the community, I'd love to see what people have done!