Cling Film / Aluminum Foil Holder in Vase Mode

Parametric Models for the Holder and Mounting Bracket are separate Files (as one requires Vase mode)

Store your kitchen paper/film/foils efficiently and neatly with this model. 

I have some preset sizes and also a parametric version to create your own. 

If you wish to use the customise the main holder model with the generator you will need to apply the following settings:

Nozzle sizes

• 0.4mm - use 0.6mm line width
• 0.6mm - use 0.8mm line width
• 0.8mm - use 1.0mm line widths

If you plan on mounting to a vertical surface i would recommend two mounting brackets as shown:

January 1st 2026 Update - V3: Fully Parametric Holder & Mounting Brackets

Now you can change:

• Box Size (Default is 50mm)
• Box Number
• Box Radius (Default 5mm)
• Length/Height of the holder
• 

November 26th 2025 Update - V2: Mounts Added!

Now you can fix it to a wall or the top of a cabinet. It also helps reducing bowing with heavy rolls of foil. 

• The mount comes in a single-hook and a triple-hook to suit how you want to mount.
• adding a mount at each end of the holder will allow you to mount horizontally under a cabinet.
• I have added a new print profiles for the mounts, as vase-mode and non-vase mode plates cant exist in the same file.

November 15th 2025 Update - All profiles have been revised. 

• Custom versions for each nozzle size you might want to use. 
  Personally i used a 0.6 mm, but 0.4 mm can work well (when the settings are correct )
  It seems the custom print settings were not exported when i shared the model to Maker World.
• Thanks for the feedback, hopefully we will have more successful prints now!

Quick Vase mode print that builds a 4 spool Cling Film / Aluminum Foil Holder for the Kitchen.

Print settings are set to not have any base, but with a removable brim.