Adopt Perfume Holder 3-slot

Perfumes from the French manufacturer Adopt have three special features: 1.) there are many scents, 2.) they have fair prices, and 3.) they come in distinctive, very slim spray bottles that are not particularly stable. Therefore, every user knows the problem that the bottles frequently tip over. Since they are made of glass, there is always a risk of them breaking.

This holder securely holds three Adopt bottles (the ubiquitous standard size) while still being very accessible. The openings are deliberately wide, so you can pull the bottles out and put them back in with one hand, without having to hold the stand itself.

If you want to use the holder for other things: the hole diameter is slightly more than 23mm and the support height is just under 50mm.

For the print, I recommend using PLA Silk+ filaments from Bambu for the lower part (my default here is Gold and Titanium Gray); for the accent on the top edge, PLA Matte in Carbon Black. Of course, any other combinations and materials are also possible.

The design of the side walls unfortunately leads to a nasty increase in print time, but I think it's worth it. It picks up on the distinctive look of the bottles from their basic shape and also introduces grooves for more grip and visual appeal. By the way, the model has two sides - where 'front' is determined by the user themselves. One side has continuous grooves, while the other has a smooth middle ring.

The print requires neither brims nor supports and turns out well even in standard quality.