IPSC Patch dispenser 19mm patches

Patch dispenser for roll of patches commonly used in Czech republic as well as parts of Slovakia and Poland (and perhaps other regions)

Rolls are about 93mm outer diameter and 39mm inner diameter. 19mm in patches diameter.

The lid is equipped with small retention bevel to fit inside the body and original small grooves to match the body to lock in place.
Release button from the original is removed.
Belt clip can be mounted from either side allowing carrying either on left or right side.
Clip should wrap around the body with the lid tightly but it does allow for rotation to further improve users comfort when reaching for patches.

If you feel like supporting more please use https://ko-fi.com/koudy . Please only do this when you are absolutely sure and can spare the money. The model is free for personal use and ko-fi is only way of showing support if you'd like to do so.

Changelog

2025-12-22 Added opposite optional clip to keep the dispenser closed when not used with clip on for example a belt.

There is 1.1 .3mf file without non belt clip and 1.2 with the newly added clip

Print settings

Supports - no
Layer - 0.2mm
Sparse infill pattern - body, lid and clips - 3D honeycomb, center insert - honeycomb
Infill - 15% or 20%
Filament - Sunlu PETG/PETG-CF