Search models, users, collections, and posts
Flexi Pickle Rick Remix: Flatter Bottom and Bigger Pupils
Remixed by
IP Report
Print Profile(3)
0.14mm layer, 3 walls, 8.5% infill
Designer
2.3 h
1 plate
0.14mm layer, 3 walls, 8% infill
Designer
1.8 h
1 plate
0.1mm layer, 3 walls, 20% infill
8.4 h
1 plate
Open in Bambu Studio
Boost
128
258
44
19
492
335
Released
Description
This model was originally created and posted by JamesThePrinter. Thank you for making this wonderful model.
However, I personally was having one issue though. The tail section kept coming loose from the build plate. I noticed that it was essentially printing a thumb size link on an edge of just a few mm.
So I decided to trim the bottom plane by 3mm giving it a larger foot print for improved adhesion and stability. I also added some spheres to the eyes to help the pupils pop a little more. Its not much but I feel that it really helped improve reliability and quality. Let me know what you think. Thank you!
General Settings:
0.4mm Nozzle
0.2mm First Layer
0.14 mm Rest of Layers
3 Walls
6/4 Solid Top/Bottom Layers
8% Gyroid Infill
This remix is based on
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (44)