Bull Horns for robot vacuum cleaners
Print Profile(1)
Description
Horns for robot vacuum cleaners with a flat top. The horns can be mounted flat or at a 15 degree upward angle. Mind chair clearance though.
The centerpiece is designed to keep the buttons and LED indicators clear for the Roomba 500/600 series (robot diameter 34cm), but the parts can of course be scaled to fit other vacuum robot models with flat tops.
Supports are only needed for the back of the horns. If you only ever want the horns lying flat, you can use grid or concentric supports that close up the outline of the horns, and just leave them on.
ASSEMBLY
1. Tape the central mounting platform at its left and right sides onto the top of the vacuum robot (The tape will be obscured by the horns) or use double-sided tape on the bottom of the mounting platform.
2. Slide the pegs of the horns into their sockets at the bottom of the centerpiece
2.5 Optional: If you want the horns to be angled upward, hold the assembly upside-down and push the small “lock" parts into the same sockets. This will lock the horns' pegs in position.
3. Place the centerpiece over the two pegs of the mounting platform.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)