Print Profile(1)
Description
See video for installation steps:
Filaments:
 | 1. Transparent Orange: Bambu Lab PETG orange/ Wally PETG amber 2. Black: JAYO PLA+/ Wally PETG 3. White: Wally PETG 4. Transparent Black: Wally PETG 5. Silk Silver Black: Caiduowu PLA Rainbow Dusk Silver Grey 6. Silk Black Blue: JAYO PLA+ Silk Dual Color Black Blue 7. Silk Red Copper: JAYO PLA+ Silk Dual Color Red Copper 8. Red: Bambu Lab PLA Matte Dark Night Red |
print profile
⚠️⚠️⚠️The model's surface texture is formed by gcode. If not printed according to the profile, the effect will be flat
1. Flame 1, Flame 2
2. Left and right light shield
3. Xiaomeng
Electronic components (can be purchased completely within 20 RMB on Taobao)
⑬ 10mm diameter touch switch + 10cm wire
⑯ Type-C charging port + PH2.0mm terminal, 10cm wire
⑱ Gradient dimming control board
⑲ 18650 battery (3.7V) + PH2.0mm terminal
⑳ Type-C charging cable, no need to buy, common charging cables are universal
⑮ LED light board (suitable for Bambu Lab photo frames) 5V power supply, 48 lamp beads, external dimensions 144x48mm, model slot fixed at 144 long edge cannot be longer, 48 short edge can be wider
The 2p connector cable can be connected to the 3p interface of the control board, as long as both terminals are PH2.0mm
2 positions where glue must be applied (other slot fixed positions can also have a drop of glue for reinforcement⚠️ Drip glue from inside the model to avoid surface whitening)
1. Type-C charging portto prevent the Type-C port from being pulled out or pushed in during charging cable insertion and removal,⑯ Type-C female, ⑰ Type-C fixed, it is recommended to use U-glue for fixing
2. Glue the 2 pigeons to Flame 2, it is recommended to use 502 glue for fixing
 |  |
Boost Me (for free)
Give some encouragement to Yu Meng CP fans
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)