Manual Air Freshener Controller type AIR WICK.
Print Profile(1)
Description
Boost Me (for free)
Boost me please!
Manual Air Freshener Controller type AIR WICK.
The cylinder model models-cylinder5.stl from Wolfram's CA Cylinders Collection was used as the basis for the can cover.
Printing instructions:
PETG material
0.4 mm nozzle
0.24 mm layer height
2 perimeters
Gyroid 5% infill
top layer 5
bottom layer 4
set seam to Nearest
set Arachne
For the can cover, set the inner brim, it will be easier to remove.
A fuzzy skin is applied to the lid.
After printing, you can leave the lower supports in the print and remove only the ones inside the nozzle hole.
Finally, after printing, I recommend lightly lubricating the protrusions on the can cover with some lubricant to make the lid slide better.
Video:
If you like the model, I would be happy to see samples of your prints.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)