We Can Do It - Rosie the Riveter Picture
Print Profile(1)
Description
Project: We Can Do It STL.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 140x140mm in size
You may print at higher layer heights below the Base Thickness of 0.96mm
The Max allowed Thickness is 3.84mm and the Actual Thickness is 2.72mm
Filaments Used:
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#0f52ba PLA+ Sunlu Blue Grey Transmission Distance: 3
#ffffff PLA Sunlu Meta White Transmission Distance: 9
#de4343 PLA BambuLab Matte Scarlet Red Transmission Distance: 2
#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 2.9
#ffcaa6 PLA+ Sunlu Skin Transmission Distance: 5
#ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 7 unique filaments
Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Blue Grey
At layer #13 (1.12mm) swap to White
At layer #17 (1.44mm) swap to Scarlet Red
At layer #22 (1.84mm) swap to Blue Gray
At layer #24 (2mm) swap to Skin
At layer #30 (2.48mm) swap to Ivory White for the rest.
If you only have one AMS: Add pause at red. Change Black to Gray, blue to beige, and white to the other white.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)