Hueforge Rockstar
Print Profile(1)
Description
Hueforge Rockstar
Boost Me (for free)
Boost me please :p it's free :D
Membership
Thank you for supporting me in my work.
Project: Rockstar.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 230x216.69mm in size
You may print at higher layer heights below the Min Depth of 0.72mm
The Max Depth is 2.6mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA Sunlu White Transmission Distance: 7
PLA BambuLab Basic Red Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 5.5
This print uses 4 unique filaments
Swap Instructions:
Start with Charcoal
At layer #9 (0.8mm) swap to White
At layer #18 (1.52mm) swap to Red
At layer #23 (1.92mm) swap to Yellow for the rest.
Please leave a comment and like if you like my Hueforge. Thank you very much.
Non-commercial !!! Non-commercial !!! Non-commercial !!! Non-commercial !!!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)