Mark 4 Frame VTX Antenna Mount plus xt60
Print Profile(0)
Description
This is a mount to keep a linear analog VTX antenna upright on a 7 inch Mark 4 FPV frame and keep the XT60 plug from getting chopped by your propellers. To fit the plug through you'll need to fish the power cables through the hole before you solder them to your ESC board, or you can desolder the XT60 plug and resolder it back on once you have the cables through. Print in TPU, Mount using frame M3 machine screws and 2 M2 machine screws and 2 M2 machine nuts.
V3 is taller by 25mm to maintain antenna erectness and vertical antenna polarization during flight.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)