Countertop Bin (Prints in Three Pieces)

Summary

This is a countertop bin that prints in three parts(for little supports plus better customization). The reason why I made this design was because I wanted more customization in my countertop bin and I also wanted a more sturdy/premium feel. I do hope that you guys will like this. Which, if you do like it, please consider giving this design a like and sharing it with others whom you think would like to print this.

(Super glue is required to put the pieces together)
 

Filaments used: Maroon Red(10205) & Jade White(10100) by Bambu.
 

Main Settings:

1) No brim.
2) Supports needed(I recommend normal supports for the handle, and to use tree supports for the other two objects).
3) 15% Gyroid infill for all objects.
4) 2 perimeters(walls).
5) .2mm Layer Height(could increase it if you'd prefer a quicker print; however, it may reduce the model's visual quality).
 

Feel free to support me financially by following this link: https://buymeacoffee.com/devilish3dprints - your support truly is appreciated :)
Once there, you can also buy a license to sell the stuff that I make! (License is limited to the selling of the physical, 3d-printed model; i.e, digital files cannot be sold. For more info, view the licensing page.)