Scraper *KnubbeL*

🇩🇪 German

Description
This bed scraper utilizes the blade, screws, and magnet from the Bambu accessory. Thanks to the magnetic guide, it automatically aligns neatly on the build plate and provides the optimal removal angle. Simply place it, push it – done!

How to Use:
Place the scraper on the build plate; the magnet pulls it flat against the metal surface. Push it behind the purge line or any remnants on the build plate, and the blade will lift the material evenly. The curved front edge guides the plastic upward, making it easy to grab and remove in one piece.

Note: Depending on the production batch, small dimensional deviations may occur with Bambu screws, magnets, or blades. In rare cases, holes may require post-processing.

⚠️ WARNING – The blade is very sharp! Assembly and use should only be carried out by individuals who are proficient in handling tools.

🇬🇧 English

Description
This bed scraper makes use of the original Bambu blade, screws, and magnet. Thanks to the magnetic alignment, it automatically sits flat on the build plate and provides the ideal angle for scraping. Just place it, slide it – and let the scraper do the job!

How to use:
Place the scraper on the build surface; the built-in magnet will hold it flat against the plate. Push the scraper under the purge line or leftover plastic, and the blade will lift it up smoothly. The curved front directs the plastic upward so you can grab it easily and remove the whole strip in one motion.

Note: Depending on the production batch, Bambu screws, magnets, and blades may vary slightly in size or depth. Minor adjustments such as sanding or drilling may be needed in rare cases. There are also great community remixes with logos and alternative magnet placements.

⚠️ WARNING – The blade is sharp! Assembly and use should only be done by those experienced with handling cutting tools.