League of Legends - KDA Bookmarks
Print Profile(1)
Description
----------------------------
My designs for free download on Makerworld are intended for PERSONAL printing use only. If you wish to sell prints of my designs, please obtain a commercial license to compensate me for my time and skills in creating these files. A commercial license to sell my Makerworld AND exclusive designs on Patreon can be found at https://www.patreon.com/busykikibee
----------------------------
This set of bookmarks featuring the group KDA from the video game League of Legends has TWO versions for each bookmark - with a light background and with a dark background. You can print BOTH versions print on the same plate as they share the same colors and the same layer swaps. If you'd like to display them all together as I have in the picture, you can print the 4 window bookmark frame designed by Canadian Gamer and found → here. You can also print a 200x200mm hueforge of the entire group together→ here.
Project: Ahri
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 50x150mm in size
You may print at higher layer heights below the Base Thickness of 0.64mm
The Max allowed Thickness is 2.4mm and the Actual Thickness is 2.32mm
This print uses 6 unique filaments
PLA BambuLab Basic Black
PLA Bambu Basic Indigo Purple
PLA Bambu Basic Pink
PLA Bambu Basic Gold
PLA Bambu Matte Desert Tan
PLA BambuLab Matte Ivory White
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Indigo Purple
At layer #11 (0.96mm) swap to Pink
At layer #15 (1.28mm) swap to Gold
At layer #18 (1.52mm) swap to Desert Tan
At layer #21 (1.76mm) swap to Ivory White for the rest.
____________________________________________________________
Project: Akali
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 50x149.99mm in size
You may print at higher layer heights below the Base Thickness of 0.64mm
The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.56mm
This print uses 7 unique filaments
PLA BambuLab Basic Black
PLA Bambu Matte Dark Blue
PLA Bambu Matte Plum
PLA Bambu Basic Gold
PLA Bambu Matte Sakura Pink
PLA Bambu Basic Light Gray
PLA BambuLab Matte Ivory White
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Dark Blue
At layer #12 (1.04mm) swap to Plum
At layer #14 (1.2mm) swap to Gold
At layer #19 (1.6mm) swap to Sakura Pink
At layer #22 (1.84mm) swap to Light Gray
At layer #26 (2.16mm) swap to Ivory White
At layer #30 (2.48mm) swap to Light Gray for the rest.
____________________________________________________________
Project: Evelynn
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 50x150mm in size
You may print at higher layer heights below the Base Thickness of 0.64mm
The Max allowed Thickness is 2.4mm and the Actual Thickness is 2.24mm
This print uses 5 unique filaments
PLA BambuLab Basic Black
PLA BambuLab Basic Blue Gray
PLA Bambu Basic Magenta
PLA Bambu Basic Gold
PLA BambuLab Matte Ivory White
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Blue Gray
At layer #13 (1.12mm) swap to Magenta
At layer #18 (1.52mm) swap to Gold
At layer #20 (1.68mm) swap to Ivory White
At layer #26 (2.16mm) swap to Gold for the rest.
____________________________________________________________
Project: Kai
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 50x150mm in size
You may print at higher layer heights below the Base Thickness of 0.64mm
The Max allowed Thickness is 2.4mm and the Actual Thickness is 2.24mm
This print uses 6 unique filaments
PLA BambuLab Basic Black
PLA Bambu Basic Cobalt Blue
PLA Bambu Basic Magenta
PLA Bambu Matte Sakura Pink
PLA Bambu Matte Desert Tan
PLA BambuLab Matte Ivory White
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Cobalt Blue
At layer #13 (1.12mm) swap to Magenta
At layer #15 (1.28mm) swap to Sakura Pink
At layer #18 (1.52mm) swap to Desert Tan
At layer #20 (1.68mm) swap to Ivory White
At layer #26 (2.16mm) swap to Cobalt Blue for the rest.
All photos you see are of the actual print. Using the same filament choices will give the same result. 3mf file is AMS ready to slice and print with height range modifier and layers prepared for you. If using the STL to print the file, apply color swaps by their mm height and use height modifications and infill instructions as per the directions provided. You can safely ignore any error message about floating regions. You do NOT need a prime tower if you are printing with the STL file. Finally, if you wish to scale the design, do NOT scale the Z axis. Happy printing!
Pictured frame, stand, or puzzle box are by @CanadianGamer and can be found in his Frames and Functional items here: https://makerworld.com/@CanadianGamer/collections/1027330
Boost Me (for free)
Want to support my designs and keep me in filament? Consider boosting my designs and giving them a like. Thank you!
Membership
My designs for free download on Makerworld are intended for PERSONAL printing use only. If you wish to sell prints of my designs, please obtain a commercial license to compensate me for my time and skills in creating these files. I have 2 commercial license options: this license is for Makerworld designs only. Another license to sell BOTH my Makerworld AND exclusive designs on my Patreon can be found at https://www.patreon.com/busykikibee
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)