Barrel with Hinged Lid - Free 3D Print Model

Search models, users, collections, and posts

blecheimer

Household>Decor

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

barrel - 0.2mm layer, 3 walls, 8% infill

Designer

5.5 h

2 plates

4.9(33)

Open in Bambu Studio

Boost

288

587

665

333

Released

Description

I was playing around with my CAD system and hours later a barrel fell out of my 3D printer. Yes, this happens more often then you might think…

This is a barrel with a hinged lid. It has a diamenter of ~110mm and a height of ~125mm. The inner volume of the barel is ~900ml. If you prefer an open barrel, you can leave the lid away.

Print everything but the lid with 0.2mm layer height, 3 walls, 5 tops, 4 bottoms, 8% gyroid infill and no support. The lid should be printed with a layer height of 0.12mm so that the print-in-place hinge is working without issues.
I was using PLA-wood for the barrel and the lid. This gives the model a nice look and feel. For the rings dark PLA-metal is perfect.

For assembly glue the rings to the barrel and squeeze the lid on the top of the barrel. It is a tight fit, but you can squeeze the sides of the lid a little bit. A few drips of superglue keep the lid in place.
According to the filament you used and your printer settings it might be necessary to sand the lid or the barrel a little bit. Then the lid should open and close flawlessly.

Disclaimer:
This work by blecheimer is licensed under CC BY-NC-SA 4.0
You are not allowed to copy this model to other 3D printing websites without my permission.

barrel

container

Comment & Rating (39)

@to4st

Print Profile

barrel - 0.2mm layer, 3 walls, 8% infill

Turns Out great!

@to4st

Turns Out great!

@user_910026211

Print Profile

barrel - 0.2mm layer, 3 walls, 8% infill

Top. Using it to collect bottle caps :)

@user_1347146988

Print Profile

barrel - 0.2mm layer, 3 walls, 8% infill

The lid keeps dropping downward but overall it is a great model. Bigger than expected. Thank you for sharing.

@wolverineprints

Print Profile

barrel - 0.2mm layer, 3 walls, 8% infill

I added more color with the painting tool. That added significant more time, but it turned out great. This looks great in my friends home bar. I had no issues printing. Thank you for sharing.

@Parlay8

Boosted

Print Profile

barrel - 0.2mm layer, 3 walls, 8% infill

printed awesome.. absolutely love it. can't wait to print more.

@Indijuegos

Print Profile

barrel - 0.2mm layer, 3 walls, 8% infill

I printed it in miniature using wood filament, and because of its smaller size and the problematic filament, the lid is only partially functional as one side broke, but that's understandable. I'm very pleased with the result. Ideally, I'd prefer the barrel not to have a logo inside.