k-cup Carousel

I am totally new to 3D printing just got my Bambu Lab P1S but totally addicted to my coffee so had to find a design for my K-Cup. The prints came out great, and as you can see it does look GREAT! The only issue I encountered was that I had to shave off a bit from each of the tree tips in order to insert them into the column. Not a big deal the extra work was worth the product.

nice🔥🔥🔥

i see what you did there

am i missing something the bottom with the bumps on it doesn't fit into the base to hold it together and i thought i needed to get some bearings for it to spin And there are no pictures of each individual piece to show what it's supposed to look like And in the case of the bearings there is no track for the bearings to even sit in. so if I put them in, they'll just fall right back out

Getting the cup holders in the pedestal is quite a chore, but once they're in it's solid! Love it!

thought column was in print.

impossible for me to construct as the pegs don’t fit into the stand. the stand has a triangle piece that female to male inserts into each other but it’s not center. I put it on and it wasn’t centered. I took it apart and it broke. 5.5 hours and 200 grams of print just gone. save your time and filament y’all.

multiple photos the same aren't helpful. How about a photo of it empty.

I printed all parts as per plan the center pieces did not fit together because there was no triangle in one of them. The branch pieces didn't fit either because the ends were to large and therefor required a lot of sanding. The bottom turn table piece didn't fit because the holes didn't line up. Don't Recommend

missing peices something isn't right on the bottom plate