Sweet Tooth | Twisted Metal

how do you paint the teeth like that? im making a mouth of sauron bust and the teeth needs to be like this

how do you do that painting in the cracks

isn't my work.... but it's l layering snd getting almost all of the paint of the brush and applying a very light layer of the browns and yellows hard to explain on text but look at you tube

I'm not completely sure what the issue is, but if the headband stud isn’t fitting through the mask, try reprinting the headband at a slightly smaller scale — it may have been resized. The opening in the mask should be 6 mm. If the problem is with the small piece that locks it in place, I’ve had good results trimming any extra plastic, then carefully heating the stud with a lighter and pressing it down. It won’t come back out without force, but it holds securely. If assembling it isn’t clear: there’s a single headband piece with holes on both ends — that one goes across the front. Then there are two stud bands (left and right sides). Each stud passes through the front headband and then through the opening in the mask. This design slightly pulls the forehead away from the mask, and you can adjust it for a comfortable fit.