beta license plate holder

TPU license plate holder for Beta 2T 125-200-250-300 and 4T 350-390-400-430-450-480-498-520 and Xtrainer 250-300.

protects the license plate from bumps. 

there is a PETG support that must be printed before the license plate holder and inserted mid-print

you will need:

3x M6x30 countersunk head screws

3x M6x18x1.6 washers

3x self-locking nuts 

insert the screw and washer into a tube and hammer the screw head until it is flush with the edge of the washer. 

this way the screw does not protrude and does not touch the license plate. 

the license plate will fit even if you don't deform the washers, but less easily.

no screws are provided on the license plate because the 4mm edge of the license plate holder serves to secure the license plate very solidly.

in addition, noises caused by vibrations are eliminated.