Kitchen Roll Holder - Paper towel BIG Roll Version
Print Profile(2)
Description
Some of you may know my Kitchen Roll Holder Design here: https://makerworld.com/de/models/955266-kitchen-roll-holder-paper-towel-holder-kitchen-rol#profileId-1051276
There were so many requests for a bigger Version, since my orignal Model is made for Kitchen Rolls common in Germany - they are smaller then for example the US Rolls.
You like it Slim? And you need no screw holes? Then maybe my completly new SLIM Holder is interesting for you. You find the Design here:
So I decided to make a Version for Big size rolls - but this was not only done with scaling the model up. It needs to be Stronger for the added weight of the bigger rolls, also it doesnt fit on the Print Beds of P1S or A1 - so I made two Versions:
- A Version for H2 Series Printers in One piece
- A Version for A1/P1/X1 Print bed size in two parts
You find both in the Print Profiles
Boost Me (for free)
you like the Design? Then boost it for free - this supports my work and make other great Designs possible!
Thank you very much!
The Design
Thanks to the curves, the holder fits very well into the kitchen and is suitable for both very modern and classic kitchens.
The curves allow the roll to be unrolled very cleanly and without bouncing.
The holder has also been designed to be very slender in order to waste as little filament as possible, but still be sufficiently stable.
I recommend printing in PETG for optimum stability
The screw holes are positioned in such a way that the screws are easily accessible with normal screwdrivers but are not too conspicuous.
The main goal was, to make the assembly as easy as possible. So I created a press fit connector. You can add some glue if you want, but it is not necessary!
Important Notes:
Please note: Since the connection is made to be strong (press fit) there are small tolerances it is not a bug if you need a little bit of force to connect the two parts!
Since I don`t have these Big Sizes Rolls, I couldn't test it live with a roll. It should fit 17cm Rolls, so this should be enough for the biggest rolls I know. If it is not enough please contact me and don't give a bad Rating!
Print Settings:
Recommended Material: PETG - I used Bambu PETG HF
Layer Height: 0,2mm
Speed: Standard Settings for PETG
Wall Lines: 4
Upper shell Layer: 5
Under shell Layer: 4
Infill: 20% Gyroid
Support: set correctly in the Profile for the Holes
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (123)