Ace Frehley Hueforge - Kiss
Print Profile(2)
Description
Boost Me (for free)
A simple click on “Boost”, helps me a lot — and it costs you nothing! Thanks for the support ❤️
Membership
With a membership, you're free to sell all my prints! It really supports my work ❤️ Thank you!
Attention if you use a different PLA than indicated, the transmission distance levels may differ and thus impact the result.
Project: Ace FREHLEY.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 235x235mm in size
The Max allowed Thickness is 2.72mm and the Actual Thickness is 2.72mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Cobalt Blue Transmission Distance: 0.7
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 5.5
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to Jade White
At layer #14 (1.2mm) swap to Cobalt Blue
At layer #15 (1.28mm) swap to Black
At layer #18 (1.52mm) swap to Red
At layer #22 (1.84mm) swap to Jade White
At layer #24 (2mm) swap to Yellow
At layer #25 (2.08mm) swap to Jade White for the rest.
How to print more than 4 colours with a single AMS: from 42 sec onwards in the video
License
Comment & Rating (3)