P2S Filament Poop Bin with Poop Chute and External Exhaust

Exhaust adapter for Bambu P2S, for connecting a 100mm (4-inch) hose exhaust  

Since the P2S chassis does not have a separate exhaust fan at the back, many people assume the P2S has no exhaust ports. However, the motherboard cooling vents at the back actually double as exhaust ports. Contrary to popular belief, the waste material outlet on the side expels very limited exhaust gas. Therefore, to cater to various needs, I designed this set of external exhaust and waste chute/poop bin models. You can combine them according to your requirements. If you have already printed the external exhaust component, you can print and install only the waste bin part

Rear exhaust + poop bin/waste chute. Using the poop bin can better prevent exhaust gas from spreading out from the waste outlet. To reduce maintenance, I made a particularly large bin

You can also use PETG Translucent for printing, to easily observe the remaining space in the poop bin

Side exhaust + poop bin/waste chute. Because printing the side exhaust model and the waste outlet clip together requires extra supports and yields suboptimal print results, the side exhaust and the waste outlet clip need to be printed separately

Or just use the waste chute/poop bin alone

You can also print only the exhaust component

You can use the original scraper screws that come with the machine for fastening, though it might not be very tight

For a better fastening effect, you can use M3X10 screws

Finally, enjoy