Sonos PLAY:1 super slim 13mm wall mount play 1

Super slim wall mount for the Sonos PLAY:1 speaker - as far as I know, this holder only works with that one speaker model.

Less than 13mm thick, it barely protrudes from the wall, and is close to invisible. 

When printing and changing any settings, please double check that you have X-Y contour compensation set to -0.4mm for the male part (the shorter one that attaches to the speaker).

I chose to make a taller mount to make it seem more integrated into the speaker. My earlier, shorter versions seemed to be more obvious when looking at the speaker from the side. It's easy to make it shorter by adding a negative modifier in the slicer - just don't forget to subtract equal amounts on both the male and female part, as the male part is shorter :)

Please tighten the Sonos screw very well, otherwise the speaker can rotate freely in the mount :)

With this model, it's not possible to connect an ethernet cable to the speaker.