Cigar Travel Humidor. Fully Printed

*Amazon links below are affiliate and i may make a small commision for purchases using these links. 

Updated 27Oct2025 - Added a second option for the cigar tray to put 6 smaller diameter cigars instead of the 4 larger ones. 

Updated 29Oct2025 - Added optional TPU seal to profiles!!!! . If you have already printed and want to add seals just reprint the base and print the TPU seal and the moisture meter seal since everything else is the same. All the 3mf files have everything required for that configuration. When using the TPU sealed version you must press down firmly on the lid to close the latches. For the TPU to seal it needs to be squished a bit. If you try to jam the latches without pressing the lid first they want to pivot from the top and pop out instead of locking down. 

This fully printed travel humidor allows the storage of a stash of cigars, cutter, lighter, and even a stand to be easily packed for travel. The Z axis on the stand can be scaled in the slicer to be more or less to fit you lighter if its longer or shorter.  

A 60G Boveda fits nicely below the cigar tray which is well ventilated to allow the proper echange of air. A generic round moisture meter fits into the lid if you choose to print one of the version that have the hole for it. The integrated pull tabs snap and allow you to pick up the tray for easy access to the hudity control pack area. 

The lid has three seperate options. One with Moisture meter and cigar logo as pictures. The second one is just the meter, centered on the lid. The final one is just a blank lid in the event you dont want to bother with colors or meters.  The lid inlay is made of TPU. There are thin fins on printed that will hold the items in the box from bouncing all around in the travel case. 

Credit where it is due. The base box was designed by @Hugo and can be found here.