Wand Light, Beauty & the Beast Prop
Print Profile(1)
Description
This is made to attach inside the ring on the front of a flashlight.
This example uses an Ozark Trail 420 lumen focusing flashlight.
This was printed using copper PLA for the base and glow in the dark PLA for the wand.
This print includes plates for diameters ranging from 11 to 26 mm.
Only slice and print the plate that matches the front of your flashlight.
Bambu brim in auto does appear to print an appropriate bed to support the height of the print.
Assemble as follows:
 |  |
 |  |
If you like, please ‘like’, follow and rate, or don't, no pressure. I thank you for your interest.
I have several other useful (and non-useful) items including 3D printer addons, like an AMS buffer guide, a filament chute, and a magnetic door seal for the P1S.
You can check them out at Gomezgames2B upload page: https://makerworld.com/en/@gomezgames2b/upload,…if you are so inclined. |
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)