No Screw Dyson SV11 Wall Mount

Based upon Will Stair's original creation. No-Screw Dyson V7 and V8 Wall Mount by Will Stairs MakerWorld: Download Free 3D Models

Not sure about the naming/differences Dyson uses. but basically the hooking mechanism that holds the back of the battery was too far away for my vacuum.

From Will's original Description

It utilizes a satisfying hinged snap feature to hold the vacuum securely in the mount with a click. 

 

The mount attaches to the wall with 2x the Large Velcro Command Strips for secure mounting as well as easy no-damage removal.

 

For material, I used PLA but PETG should work well but the snap may have slightly less retention force. It is critical that the device is printed with the layer lines perpendicular to the hook direction for strength.

 

Please let me know if you would want new versions or features or have any questions.

Orca Slicer Settings I Printed on (I don't have a bambu, sorry :( )

• nozzle size: .6
• Wall Generator: Arachne
• Layer Height: 0.3 mm
• Wall Loops: 6
• Sparse Infill density: 25%
• Support: Enabled
• Skirt Loops: 2
• Brim Type: No Brim

Changes

• Added a 3% slope to help counter balance the battery a bit
• Shortened the length to snapping hook to work for the length of my vacuum