Bambu Lab X1C/P1S Exhaust Kit
Print Profile(2)
Description
Despit being an enclosed deisgn , these printers still hvae holes, crevaces and gaps where VOCs can leak into the immediate environment.
Create negative pressure to extract VOCs continuously out a window or through a filter.
This kit includes:
- a bracket for the X1C, P1S or P1P with housing
- 92mm fan housing
- vent
Use 4 inch ducts to connect all the components.
Fan Housing
This is a basic housing for a 92mm computer fan. There are 4mm diameter holes on each side to hold the lid in place and an exit hole for the fan wiring. Attach a 4inch duct to each side.
4-inch Duct Bracket
A simple bracket to attach a 4-inch duct to the back of an X1, X1C, P1S, and P1 with corresponding housing.
Attach with magnets for easy installation and removal or VHB tape for a better seal.
Window Vent
This is simple vent/intake meant to be used in a window without the need to drill through a wall, thus the minimal clearance. Use this with a thin sheet of plexiglass, cardboard, or any other similar material.
Add mosquito screen/mesh to keep bugs and pests out.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (285)