Search models, users, collections, and posts
Optimum TU2004V Compound Rest Power Feed Adapter
IP Report
Print Profile(1)
0.2mm layer, 6 walls, 47% infill
Designer
1.1 h
2 plates
Open in Bambu Studio
Boost
0
5
0
0
1
0
Released
Description
This is a quick for Optimum optiturn TU2004V Drill/Screwdriver Adapter for Lathe Feed. I have seen quite many metal based projects on youtube so I decided to make on by printing it. This can be printed PLA or PETG (PLA profile included). This uses 5mm hex driver bit (the hole is 4.90mm) but I think you can use 3/16 inch bit as well (warm up the bit with lighter and press it in or use CA glue). There are two versions (59mm and 50mm). Should with both cross slide and compound slide. This has been working very well, only caveat is that you need to remove outer shell of the hand handle or shorten it.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (0)