Print Profile(3)
Bill of Materials
Description
Boost Me (for free)
Huge thanks for every boost!
About the print:
There are two versions:
- a smaller one that fits an LED tealight under it
a larger one for LED lamp kit integration
*note: the model is not symmetric so if the base and the lamp body don't align well, just turn the base 180° and assemble them again
The cable slot is quite tight. It's best to push the cable into the slot with a pen or the side of a screwdriver before putting on the shade part.
Print guide:
I strongly recommend using Jade White PLA Basic. The lighting effect is best with this filament.
It is an easy print witohut supports. I used the standard 0.2mm profile, but feel free to use your preffered settings.
Commercial License:
You can subscribe for a commercial license membership on my Patreon or here on Makerwolrd:
Membership
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (152)