Isaac

ha salido genial a la primera. necesitaba una argolla en color negro y no encontraba ninguna, gracias a tu diseño he podido hacerlo. muchas gracias 

It came out great the first time I tried it I needed a black ring and couldn't find any thanks to your design I was able to make one thank you very much

Kristunerillo

0.16mm layer, 2 walls, 15% infill

Thank you for the feedback, and I will make the changes.

ING_VER

BloodSteyn: Hi, I believe you added this model to the wrong category, it may be a 3D Printed "PART" but it is not a 3D "PRINTER" Part.
May work better if you change it to Tools &gt; Organizers
Let's keep the categories clean, thanks.

BloodSteyn

GoaP

1970luizcosta

Agradezco tu retroalimentación, lo tendré en cuenta para futuras actualizaciones.

I appreciate your feedback, I will take it into account for future updates

quebrou imediatamente após a impressão.

user_1207959927

jomgarcia2486

cover

vista-de impresion.jpg

separaciones.png

Vista-iso.png

vista-imp-1.png

vista-imp-2.png

plate_1.png

WhatsApp Image 2025-10-14 at 14.14.18_407634b2.jpg

La argolla de plástico es una opción para organizar tus llaves o salir de un apuro mientras encuentras una de metal. No necesita soportes, estos ya vienen incluidos en el diseño y solo debes despegarlas de la argolla (precaución de no romper), en caso de tener problemas con las tolerancias ajústalas a la de tu impresora.Utiliza altura de capa de 0.16mm, con generador de perímetros: Aranche. Se recomienda imprimir en PETG para tener mayor dureza, pero en PLA funciona de maravilla.Software y Hardware utilizados: Orca Slicer, Solidworks, A1 mini.&nbsp;The plastic ring is an option for organizing your keys or getting out of a tight spot while you find a metal one. No supports are needed, as these are already included in the design. You just need to detach them from the ring (taking care not to break them). If you have problems with tolerances, adjust them to those of your printer. Use a layer height of 0.16 mm, with perimeter generator: Aranche. Printing in PETG is recommended for greater hardness, but PLA works wonderfully. Software and hardware used: Orca Slicer, Solidworks, A1 mini.

The plastic ring is an option for organizing your keys or getting out of a tight spot while you find a metal one. No supports are needed; these are already included in the design. You just need to detach them from the ring (be careful not to break them). If you have problems with tolerances, adjust them to your printer's settings.Use a layer height of 0.16mm, with perimeter generator: Aranche. Printing in PETG is recommended for greater hardness, but PLA works wonderfully.Software and hardware used: Orca Slicer, Solidworks, A1 mini.&nbsp;

Print Profile(1)

Description

Comment & Rating (9)

License

Related Models

Plastic ring

Print Profile(1)

Description

Comment & Rating (9)

License

Related Models