Pokémon GO 3-Star Appraisal Badge Magnet

This design is inspired by the Pokémon GO 3-star appraisal badge — printed in white, pink, and yellow for that classic look.

There are two plate versions included:

• The first plate has all details on top — it gives the cleanest and most ideal look, but requires very consistent extrusion. If your printer is well-tuned, that’s the one to go for.

• The second plate has the pattern facing down, directly on the build plate, which gives a smooth top surface. There’s a slight overhang near the center, but it’s usually more reliable for most printers — as long as your build plate is clean and has good adhesion.

  

Each print takes about 40 minutes, so feel free to test both and see which one works best on your setup.

The pink I used was Sunlu Silk Pink, which gives a nice soft sheen.
Magnet holes are sized for 12 mm × 2 mm magnets (I left 12.3 mm clearance) — just add a drop of glue and you’re good to go.

You can use a pair of magnets to attach it to your backpack when you’re out catching Pokémon, or wear it at conventions — it also makes a great fridge magnet or small desk decoration.