Radiomaster/Jumper Wall Mount - Controller+Module
Print Profile(1)
Description
Radiomaster / Jumper Wall Mount - Controller + Module
I started this hobby (FPV Drones) and couldn't find a wall mount which would fit my radio. So I decided to design my own.
I designed it in a way to be also possible to use it with other types of radios, so with other sizes (I hope so).
Here you have a top part where the radio is holding on it and then there is a bottom part which will help the top part not to have all the weight of the radio. This way you can also place the bottom part a bit lower or higher, for example, if your radio is longer or shorter than this one.
The two parts are with 55% infill density to make it stronger and not break.
The arm on the top of the controller is quite long and I wanted it to stay good vertically, so I used the space between the controller and the wall as a holder for the Module, so you don't lose it somewhere at home and need to search for it.
Let me know if it works for you too! :)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)