Print Profile(1)
Description
Project: Mimikyu.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 188x235mm in size
You may print at higher layer heights below the Min Depth of 0.96mm
The Max Depth is 3.2mm and the Actual Depth is 3.3mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 2
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Gold Transmission Distance: 2.3
PLA BambuLab Basic Jade White Transmission Distance: 6
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #17 (1.44mm) swap to Blue Gray
At layer #22 (1.84mm) swap to Red
At layer #31 (2.56mm) swap to Gold
Border Only Colors from here until the end.
At layer #36 (2.96mm) swap to Jade White
This slider is set higher than the mesh depth. It is not affecting your final mesh. Consider removing it.
At layer #41 (3.36mm) swap to Black for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)