Cupsule Toy (Gacha) vending machine for Makerchip

Update(2026.05.09)

“EduColon Mega” designed by STAB-B is launched !

https://cults3d.com/en/3d-model/tool/educolon-mega-the-3d-printable-capsule-machine-built-for-the-big-stage-stag-b

Model Description

English

This version includes a modification that allows you to use a Makerchip instead of a coin.
It is based on the full assembly version that combines parts from STAG-B, Amethyst3D, and Adam, scaled to 200%.
All parts were renamed and reorganized for easier identification during assembly.

The gray parts are internal or barely visible.
The Makerchip fits perfectly in place, allowing smooth rotation and customization.
Apply a small amount of grease to the gears for smoother movement.
All parts are printed in PLA.
I used 50 mm capsules with no issues; the maximum size is about 66 mm.

This remix keeps the charm of the original EduColon design by STAG-B, while adding slit windows for better visibility and eliminating the need for transparent filament or acrylic sheets.
Now you can easily create a clean, opaque model using your preferred filament color.

Please refer to the video below for assembly instructions.
https://www.youtube.com/watch?v=dSw5mzsstnc
https://www.youtube.com/watch?v=f_CIJZziMh8
https://www.youtube.com/watch?v=QIO7MudYlyk

Please refer to the attached image for the initial position when combining the rotating part with the front panel.

Japanese

This version includes a modification that allows you to use a Makerchip instead of a coin.
The model is based on a full assembly version that combines elements from STAG-B, Amethyst3D, and Adam, reconfigured at 200% scale.
All part names have been organized and renamed for easier identification during assembly.

The gray parts are internal or barely visible sections.
The Makerchip fits precisely, allowing for smooth rotation and customization.
Applying a small amount of grease to the gears will make the movement smoother.
All parts are printed in PLA.
I used capsules approximately 50 mm in diameter without issues; it supports up to about 66 mm.

This model retains the charm of STAG-B's original "EduColon" while adding slit windows to improve visibility and eliminate the need for transparent filament or acrylic processing.
You can easily create a beautiful finish with your preferred opaque filament.

Please refer to STAG-B's videos for assembly instructions.

https://www.youtube.com/watch?v=dSw5mzsstnc
https://www.youtube.com/watch?v=f_CIJZziMh8
https://www.youtube.com/watch?v=QIO7MudYlyk

Please refer to the attached image for the initial position when combining the rotating part with the front panel.

License & Credits

English

This model is a remix of the "EduColon" capsule holder by STAG-B
(https://cults3d.com/en/design-collections/STAG-B/japanese-capsule-toy-machine-EduColon).
It is released under the Creative Commons Attribution–NonCommercial–ShareAlike (CC BY-NC-SA) license.

• Attribution: Credit must be given to STAG-B.
• NonCommercial: Commercial use is not permitted.
• ShareAlike: Derivative works must be shared under the same license.

Japanese

This model is a remix based on the "EduColon" capsule holder by STAG-B
(https://cults3d.com/en/design-collections/STAG-B/japanese-capsule-toy-machine-EduColon)
It is released under the Creative Commons Attribution–NonCommercial–ShareAlike (CC BY-NC-SA) license.

• Attribution: When publishing or sharing, STAG-B must always be clearly credited.
• NonCommercial: Commercial use is prohibited.
• ShareAlike: Derivative works must also be released under the same license.