RAW Cone Loader Replica King & 98 Special
Print Profile(1)
Description
This is my replica model of the king-size and 98 special size RAW Cone Filler. Works identical to the original!
If you're looking for the 1 ¼ and lean version, it can be found here: https://makerworld.com/en/models/1878349-raw-cone-loader-replica-1-1-4-lean#profileId-2011097
Due to the small details in the original, this model is printed at .08 layer height, but the included print profile is the one in the pictures and uses a .4mm nozzle, so you don't have to get a smaller nozzle than the one included with your printer! This was modeled without the use of 3D scanning, but I can confidently say all dimensions are within half a millimeter of the original or closer and are nearly identical to the original. It even has the slight downwards angle near the open end to more easily scrape trays / scoop material! Thank you for checking out my project!
The rest of my stoner gear and uploads can be found here: https://makerworld.com/en/collections/10444921-my-420-stoner-uploads
Boost Me (for free)
My replica models take a lot of measuring and very careful adjustments / fine-tuning. I ensure that all my replica models are nearly identical to the original. With this being said, they tend to take me quite a bit of time and test prints, being a beginner! If you feel I did a good job and want to help me out, leave me a boost!
License
Comment & Rating (32)