P2S First Layer Adhesion Test ⧸ Bed Cleaning
Print Profile(4)
Description
Maximize your P2S first layer success with the largest coverage adhesion tester on MakerWorld, lifting cleanly with its comfort pull tab for quick, frustration-free checks.
 Designed as part of my ongoing collection of practical Bambu Lab upgrades. Each model is conceived, printed, and endurance-tested on my own machines, refined through dozens of iterations to match the printer’s true mechanical behavior. Precision isn't assumed here, it’s verified layer by layer.
Bambu Lab P2S: P2Series Design Journey
Follow me if you like my work, that kind of appreciation really dries my filament. Likes and boosts feed the Maker World algorithm and keep the new models coming |
This model brings the proven A1 adhesion test concept to the new P2S. It is designed to cover a wide print area so you can quickly verify Z-offset, nozzle flow and surface adhesion.
The continuous line pattern makes it easy to detect if the first layer is too high or too low. Once the print is complete, the plate lifts off cleanly using the integrated comfort pull tab, leaving the bed ready for your next job.
Use this test after nozzle swaps, filament changes, or bed cleaning to confirm consistent adhesion and a clean surface.
Part #01 in my P2Series Design Journey.
Highlights:
- Maximum printable area for P2S printers on MakerWorld
- Comfort grip tab for quick and easy removal
- Parametric customization via the MakerWorld Customizer
- Optimized for bed leveling and adhesion diagnostics
Customization Tips:
Fine-tune the gap from purge strip and plate edges directly in the Customize section to match your needs perfectly.
Helpful Advice:
- 2 layers highlight surface inconsistencies without excessive adhesion
- 1 layer shows trouble spots faster but sticks tighter - remove carefully!
- Clean the plate thoroughly using warm water and dish detergent (not hand soap)
- Always run a calibration under Device → Calibration before testing for best results
More Build Plate Cleaners & Testers
Using a different Bambu Lab printer? No worries - I’ve designed build plate cleaners and testers tailored to other models as well.
Same idea, just perfectly adapted to fit each build plate. Check them out to keep your prints sticking flawlessly and your bed spotless, no matter which machine you’re using.
Designed for the H2D’s build plate—easy to print, super effective, and perfect for quick alignment checks.
https://makerworld.com/models/1271342-bambu-lab-h2d-build-plate-cleaner-and-tester
Designed for the H2S build plate—single nozzle, full print
https://makerworld.com/models/1750513-h2s-first-layer-adhesion-test-bed-cleaning
Covers the full bed of the X1 series—ensures optimal adhesion across the entire surface.
https://makerworld.com/models/1046216-bambu-lab-x1c-x1e-full-size-bed-cleaner-and-tester
The classic cleaner for the P1 series—great for maintenance and adhesion troubleshooting.
https://makerworld.com/models/1007968-bambu-lab-p1s-p1p-full-size-bed-cleaner-and-tester
Made to match the A1’s full print area—parametric and practical.
https://makerworld.com/models/1007393-bambu-lab-a1-full-build-plate-cleaner-and-tester
A must-have utility for the A1 mini—compact, effective, and easy to print.
https://makerworld.com/models/1007564-bambu-lab-a1-mini-build-plate-cleaner-and-tester
Boost Me (for free)
Support for this model helps fund 3D printing in a local school in Lower Saxony, Germany. Contributions go toward printers and filament for student maker and robotics clubs, including preparation for "Jugend forscht" competitions. Likes, follows, and boosts help increase visibility and indirectly support hands-on technical education.
Translation Notice: I am not a native English speaker. I write all descriptions in English to ensure the best automated translation into other languages. To make the text smoother and more readable, I use language tools to refine my wording.
Bill of Materials Notice: Hero Shot models are usually printed in Bambu Lab PLA Basic, primarily Pumpkin Orange, Purple and Matte Charcoal Black. The Bill of Materials contains the recommended filament for the model, which may differ from the filament used for the photos.
Purchases made via the BOM support my work through the Maker World Commission Incentive at no extra cost to you.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (237)