CoyoteFlow Throttle Adapter – 5.0L to 3.7L Cyclone

This adapter allows you to mount a Ford 5.0L (Coyote) throttle body onto a Ford 3.7L (Cyclone) intake manifold.

🧠 Purpose

Designed to deliver better throttle response and improved airflow performance, this adapter lets you upgrade to a larger OEM throttle body while maintaining factory reliability and electronic compatibility. Skip the pedal commander and add a real performance mod  today - one that’s been tested and proven on 2011–2014 Mustangs and F-150s. Easily go from the stock 68mm Cyclone throttle body to the Coyotes 80mm throttle body without having to modify your intake manifold or redrill the Coyote throttle bodies mounting holes.

⚙️ Hardware Requirements

• Throttle body to adapter: M5 nuts and bolts
• Adapter to intake manifold: M6 bolts

🧩 Included Files

• Adapter body
• Printable 5.0L gasket (TPU) – included for convenience, though use of a Ford OEM gasket is strongly recommended for long-term sealing performance.

🔧 Compatibility Notes

This adapter was designed for the Ford 3.7L Cyclone V6, but may also fit other Ford engines with similar intake patterns such as the 3.5L NA and 3.5L EcoBoost. Fitment on these engines has not been tested and may require adjustments.

⚠️ Important

• This is not to be printed in PLA or used in environments that could exceed the safe temperature limits of your chosen material.
• By downloading or using this model, you acknowledge and accept full responsibility for its use and release the designer from all liability for any damages, failures, or consequences arising from its installation or operation.
• The 5.0L throttle body has a larger opening, so additional silicone couplers or intake boots will be required to fit your intake. These are application-specific and not included.
• Always verify clearance before installation to ensure proper fitment under the hood and with surrounding components.