printed perfectly in Matt bamboo lab PLA filament

user_3885626471

0.6mm nozzle, 0.24mm layer, 2 walls, 15% infill

Gorgeous, the red looks even better than black for the stitches

Deadmoon

user_3014814408

8_Bit_Dragon

cover

ShrunkenHead5.jpg

ShrunkenHead4.jpg

ShrunkenHeadRender.png

ShrunkenHead3.jpg

plate_1.png

2025-10-14_e7ff4eafead1f.jpg

ShrunkenHead1.jpg

ShrunkenHead2.jpg

Printer: Bambu Lab A1 (or equivalent AMS-enabled printer) Nozzle Diameter: 0.6 mm Layer Height: 0.24 mm (Optimal)Filaments:<ul><li>Color 1: PLA Glow – Green (Skin)</li><li>Color 2: Generic PLA – Brown (Stitches &amp; Wrap)</li><li>Color 3: Generic PLA – Black (Hair &amp; Loop)</li></ul>Estimated Print Time: ~4h 20m Model Print Time: ~4h 3m Preparation + Timelapse: ~17m Estimated Filament Use: ~82.81 g total (~25 m model, ~4 m support, ~38.56 m flush, ~15.13 m tower) Estimated Material Cost: ~$2.24Supports: Required (tree supports recommended) Support Material: PLA (Generic) Support Density: Standard Support Removal: Easy to remove by handRecommended Settings:<ul><li>Top Layers: 3</li><li>Bottom Layers: 3</li><li>Top Shell Thickness: 0.8 mm</li><li>Bottom Shell Thickness: 0.8 mm</li><li>Infill Pattern: Rectilinear</li><li>Infill Density: 15%</li><li>Print Speed: 50% (recommended for best multi-color surface quality)</li><li>Build Plate Adhesion: Standard skirt/brim</li></ul>Tips:<ul><li>This model is pre-colored and optimized for 3-color AMS printing — no painting or manual filament swaps needed.</li><li>Ensure AMS calibration is up-to-date for clean color transitions and minimal purge waste.</li><li>Slowing print speed improves layer bonding and stitch detail sharpness.</li></ul>

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

This eerie little relic is designed specifically for multi-color printing on AMS-equipped printers. The model comes fully pre-colored for 3-color AMS printing, so you can drop it right into your slicer and watch the details come to life without any painting or manual filament swaps.With stitched-shut eyes and mouth, skeletal features, and a stylized loop forming a question-mark-shaped keyring holder, this keychain has a striking presence whether it’s hanging from your bag, keys, or displayed as a collectible.

Print Profile(1)

Bill of Materials

Description

Comment & Rating (4)

License