PET bottle recycling factory
Print Profile(1)
Bill of Materials
- OZ-CUCR-6mm DC3V x 1: motor reducer for the filament winder
- 30AWG 0.06 sq.mm x 5: 30AWG 0.06 sq.mm thin silicone wires for soldering, 5 pieces of different colors, 1 m each
- DC-DC LM2596S x 5: They may be needed to slow down the rotation of the motors.
- Spring loaded magnetic pogo pin connector x 6: for conveyor switches
- Arduino Nano x 1: for the filament stacker
- FF-M20 x 2: gear motor with screw
- USB Type-C LAUBEI 3А x 1: For power supply
Description
Boost Me (for free)
https://boosty.to/ondrei3000/donate?forPost=9802172
A miniature PET bottle filament recycling factory. The factory is fully motorized but does not require electronics for control. All nodes are shown here: loading hopper -> feed conveyor -> shredder -> screw extruder -> pigment addition -> filament winder -> spool feed -> spool packaging -> box shipment.
The project will not require the use of bolts. All parts are inserted into each other.
Only the filament coming out of the extruder will need to be glued. No more glue will be required.
The control is performed using keys with Pogo pins inserted.
When creating the project, I used motors without specialized connectors. I used wires and a soldering iron, but this does not prevent you from using parts from MakerLab. Everything is compatible.
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (27)