Search models, users, collections, and posts
Hollow Knight: Silksong - Needle
IP Report
Print Profile(1)
Standard Print Profile (PLA) - 0.4mm Nozzle
Designer
2.9 h
1 plate
Open in Bambu Studio
Boost
242
612
27
5
689
355
Released
Bill of Materials
Bambu Filaments
Select all
Description
A full-scale replica of Needle from Hollow Knight: Silksong.
- Cosplay as Hornet from Silksong with a trusty Needle by your side!
- Measures roughly 30 inches in overall length
- 5-section construction joined by pins for ease of printing
- A hammer or rubber mallet is necessary to drive the pins between each of the pieces, as they form a permanent friction fit
- For less strenuous assembly, scale the pins down to 95% and use them strictly for alignment purposes, and use super glue to permanently secure the pieces together
- If this is going to be used for high-velocity cosplay action (i.e. swinging wildly through the air, etc.), please note that it is not designed to be more than a prop for display and casual holding/posing.
- For this use case, applying super glue between each joint in addition to the pins would be recommended to ensure joints do not separate over time
- This print is not strong enough to strike other objects with
- A hammer or rubber mallet is necessary to drive the pins between each of the pieces, as they form a permanent friction fit
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (27)