The Levitating Healthpack (NO AMS)
Print Profile(1)
Bill of Materials
- Superglue x 1:
Description
Video games inspired health pack that floats.
The base is sized for a maglev electromagnet kit and accepts the stock kit housing intact. Vent grills are built in, plus a power-socket cutout and a light-sensor slot. The top fixes with four M2×6 screws.
The floating pack has three main parts: base, top, and a threaded main tube. The base and top screw onto the tube, so the pack doubles as a small storage capsule. Small accent parts are separate and attach with a drop of superglue.
Build:
- Print the parts.
- Slide in the maglev base, route wires, seat the sensor.
- Use the four M2x6 screws to secure the top of the base.
- Put the maglev floating part inside the floating pack base and screw the tube. Now do the top part.
- Superglue the accent parts.
- Use Bambu Studio’s Assembly View if the fit order isn’t obvious.
- Assembly guide will be available if requested.
superGeometry @ MakerWorld
Boost Me (for free)
Or follow me to keep up with what's new!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)