The Lord of the Rings - Morgoth vs Fingolfin

Hueforges can be resized, only change the X and Y scale, leave the Z height the same.

The Lord of the Rings - Morgoth vs Fingolfin

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 133.4x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 1.84mm and the Actual Thickness is 1.84mm

Filaments Used:
PLA Elego Black  Transmission Distance: 1
PLA+ Sunlu Red  Transmission Distance: 4
PLA Elego Yellow  Transmission Distance: 6
PLA Elego White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Red
At layer #11 (0.96mm) swap to Yellow
At layer #14 (1.2mm) swap to White

Border Only Colors.
At layer #23 (1.92mm) swap to Black or any color for the rest.

If you have any requests on a new Hueforge, feel free to ask — I’ll see what I can do!