CzejCzej

cover

426984845_968582778321057_5326687332417325254_n_384959f4-537c-4a4f-9835-c2cf768c2d24.jpg

plate_1.png

steven.leeman

plate_1.webp

printed without supportused pla basic white&nbsp;

0.2mm layer, 2 walls, 15% infill

Käpt'n Unbrauchbar

2024-10-26_cdd8da55daf2d8.webp

2024-10-26_c7709c9d5b2ae8.webp

2024-10-26_646702ec48eec8.webp

Ein Profil für den A1 Mini. das Modell wurde nach rechts ausgerichtet, damit es näher an der Z-Achse sitzt. Das soll schwingungen reduzieren. Auserdem habe ich eine Schürtze hinzugefügt, so hält es besser auf der Druckplatte.<ul><li>100% Füllung</li><li>3 Wände - Oben und unten jeweils nur eine, &nbsp;damit es schön aussieht.</li><li>PLA Weiß, in meinem Fall von Elegoo</li></ul>

A profile for the A1 mini. The model was aligned to the right so that it sits closer to the Z-axis. This should reduce vibrations. I have also added a skirt, so it adheres better to the build plate.<ul><li>100% infill</li><li>3 walls - only one on the top and bottom, to make it look nice.</li><li>PLA White, in my case from Elegoo</li></ul>

0.2mm layer, 3 walls, 100% infill

Recently moved into my own house and some of the windows were equiped with remote controlled blinds and I needed a holder for these :) The Somfy Smoove controlers are 80mm wide and 10mm thick and they just prefectly fit in this holder. Printed with PLA at 0.2mm layer height on the stand upright position.

Somfy Smoove holder

yellowjellyfish

2025-10-24-21-14-55-516.jpg

2025-10-24-21-16-21-826.jpg

Somfy Smoove remote support

ASIA

Print Profile(2)

Description

Comment & Rating (20)

License

Remixes (1)

Related Models