Flug Halo Spiral E27 ceiling lamp

Flug Helo is the second design in the Flug lighting series — a lightweight, 3D printed lampshade inspired by the gentle rotation and balance of a helicopter rotor. With its minimal yet dynamic form, Flug Helo casts soft, ambient light and adds a sculptural element to any interior.

Each shade is individually 3D printed using sustainable materials. Minor surface variations or layer lines may be visible — a natural result of the printing process. These subtle imperfections are part of what makes every Flug Helo one-of-a-kind. In a world of mass production, nothing truly perfect is ever truly personal.

Installation Instructions:

1. Handle with care. The lampshade is lightweight and delicate.
2. Turn off power to the light fixture before installation.
3. Align the central opening of the Flug Helo with the socket fitting.
4. Secure the lampshade using the provided ring or clip, depending on your fixture type. Do not overtighten. (opening is 40MM)
5. Install bulb E27 
6. Restore power and enjoy the soft, atmospheric glow of Flug Helo.

⚠️ Important Safety Notice:

• This lampshade is designed for use with LED bulbs only. Do not use incandescent or halogen bulbs, as they may generate excessive heat and damage the material.
• Keep away from direct heat sources and avoid contact with moisture.
• Not suitable for outdoor use.
• Always install according to local electrical safety regulations. If unsure, consult a qualified electrician.

I used the following parts of Amazon 

• https://ap.lc/NyPaD

• https://ap.lc/gNnbO