Print Profile(0)
Description
Summary
Small space-saving LED lamp with 2W G4 bulbs each, available as a 3 or 4-fold version with a diameter of 60mm.
Can also be used in a double version as lighting behind the TV.
A 12V 5.5 x 2.1 mm jack and a small 2-pin rocker switch are still required
and a suitable 12V 1A power supply and G4 sockets as needed
The lamp was only plugged together during assembly, printing was relatively precise. The design has since been modified so that assembly is possible even with larger tolerances, and now the bottom and lid of the main body can each be fastened with 2 small screws. The bulb holder and extension can be connected with superglue and also glued to the lid of the main body.
Printed with the SOVOL SV07
25% infill without support except for the wall mount
125mm per second
Lampshade in vase mode
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)