Makita Router RT0702 Dust Collector Edge osAVC - Free 3D Print Model

Search models, users, collections, and posts

printerprintyprint

Tools>Machine Tools

IP Report

Print Profile(2)

All

X1 Carbon

H2D

X1E

H2S

P1S

H2D Pro

P1P

A1 mini

P2S

H2C

X2D

A2L

0.2mm layer, 6 walls, 25% infill

Designer

2.4 h

1 plate

5.0(8)

Without osVAC, plain vacuum adapter

Designer

2.3 h

1 plate

4.0(1)

Open in Bambu Studio

Boost

262

230

132

Released

Description

Dust collector / vacuum adapter for the Makita RT0702 edge router.

The novel feature of this dust collector is, that it attaches in the right orientation (the cable of the router will follow the same direction as the vacuum hose) and the “one screw” mount. By using the original finger screw you can easily snap on the dust collector and mount it by hand in a few seconds. So it is very easy to remove the dust collector to reach tight corners. Plus, you can use the original base plate which has superior glide properties.

Very tight tolerances, in case it snaps not into place, check the little rails at the screw position and give them a little sanding.

The vacuum connector is for osVAC Neo M32. If you need other adapters let me know and I will look into it.

PETG is recommended

Comment & Rating (15)

@user_421276963

Print Profile

0.2mm layer, 6 walls, 25% infill

Finally, less dust and shavings in the workshop as everything is immediately extracted. I didn't think something like this existed, and then with the osVAC system, it's simply great. Thank you for this

Show original

@nsommer

Fantastic design! The object surface that slides into the side of the router where you put the screw didn't come out so great with my A1 mini and I had to use a file to sand it to fit. Still works though doing flush trimming or roundovers is sooooo much cleaner now. 🤩

@fredriknordheim

Print Profile

0.2mm layer, 6 walls, 25% infill

Works great!

@user_2769644590

hi I love the model but is there anyway that you could edit it so that there is no locking tabs on the collection port?

The designer has replied

@printerprintypr

Hi, I will provide in the next days a model without locking mechanism.

@user_3767533852

Print Profile

Without osVAC, plain vacuum adapter

Printed great but the tolerances were too tight for my Makita RT0702CXJ2. Did not slot into the bracket where the screw goes and also the brim around the hole of the router would not go in. Broke both parts off and taped the thing to the router...dust collection was perfect after that though :) Since I haven't read anybody having the same issues I thing it might be an issue on my end. Printed in Bambu transliscent petg