Pumpkin Cat Peekaboo
Print Profile(3)
Description
Peekaboo!
Halloween themed cute little desktop decoration.
No AMS required, parts are separated, and need to glue together (except the flexi bottom part and the center rod).
Separated print profiles:
- A) - all parts in one plate, separated for easy coloring, needs to glue together
- B) - parts separated by color, for colored print without AMS
- C) - assembled, no need to glue anyhting
What parts and how to glue together
You can paint them, or print each colored parts from different colored filament, and you can have a colorized model without AMS!
It's contain small parts (the face and the paws), so be be sure your plate is properly cleaned, and your filament is ready.
It was tested multiple times and placements, and with clean bed and proper filament settings, even the small parts are fine:
If you print the assembled version, and the support on the head wont came of easily, use a pliers or a side cutter for easy remove.
Important:
Make sure your print bed is clean, and check your printer calibration.
Verify the recommended settings, and make sure your bed is level.
All parts are oriented for the best results. Brim and supports (if the part has any) have been adjusted to ensure successful printing.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)